Filter
Top Products
6766
Manually Configuring Network Settings
6766
Manually Configuring Network Settings
3. If “Specify and IP address” is selected, your Router will need to be
set up for a static IP connection type. Write the address information in
the table below. You will need to enter this information into the Router.
4. Write the IP address and subnet mask from the “IP Address” tab (3).
5. Click the “Gateway” tab (2). Write the gateway address down in the
chart.
6. Click the “DNS Configuration” tab (1). Write the DNS address(es) in
the chart.
7. If not already selected, select “Obtain IP address automatically” on
the IP address tab. Click “OK”.
Restart the computer. When the computer restarts, your network
settings are now configured for use with the Router.