Filter
Top Products
106
applications accessing your local network from the Internet. Outgoing Packet Filter
rules prevent unauthorized computers or applications accessing the Internet. Select
if the new filter rule is incoming or outgoing.
Source IP: Select Any, Subnet, IP Range or Single Address.
Starting IP Address: Enter the source IP or starting source IP address this filter
rule is to be applied.
End IP Address: Enter the End source IP Address this filter rule is to be applied.
(for IP Range only)
Netmask: Enter the subnet mask of the above IP address.
Destination IP: Select Any, Subnet, IP Range or Single Address.
Starting IP Address: Enter the destination IP or starting destination IP address this
filter rule is to be applied.
End IP Address: Enter the End destination IP Address this filter rule is to be applied.
(for IP Range only)
Netmask: Enter the subnet mask of the above IP address.
Protocol: Select the Transport protocol type (Any, TCP, UDP).
Source Port Range: Enter the source port number range. If you only want to specify
one service port, then enter the same port number in both boxes.
Destination Port Range: Enter the destination port number range. If you only want
to specify one service port, then enter the same port number in both boxes.
Helper: You could also select the application type you would like to apply for
automatic input.
4.4.5.2 URL Filter