Billion Electric Company 30 Network Card User Manual


 
14
Port Function
1 RESET
To reset the device and restore factory default settings, after
the device is fully booted, press and hold RESET until the
Status LED begins to blink.
2 WAN2
WAN2 10/100M Ethernet port (with auto crossover support);
connect xDSL/Cable modem here.
3 WAN1
WAN1 10/100M Ethernet port (with auto crossover support);
connect xDSL/Cable modem here.
4
LAN
1 — 8
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
eight LAN ports when connecting a PC to the network.
5 DC12V Connect DC Power Adapter here. (12VDC)
1.3.3 Rack Mounting
To rack mount BiGuard 30, carefully secure the device to your rack on both sides
using the included brackets and screws. See the diagram below for a more detailed
explanation.