Billion Electric Company 30 Network Card User Manual


 
98
Time Zone: Select Enable or Disable this function.
Local Time Zone(+-GMT Time): Please select the time zone that belongs to your
area.
NTP Server Address: Please input the NTP server address you would like to use.
Daylight Saving: To have BiGuard 30 automatically adjust for Daylight Savings Time,
please check the Automatic checkbox.
Resync Period: Please input the resync circle of time zone update.
Click Apply to apply the rule, Click Cancel to discard the changes.
4.4.4.2 Remote Access
To allow remote users to configure and manage BiGuard 30 through the Internet,
select the Enable radio button. To deactivate remote access, select the Disable radio
button. This function also enables you to grant access from any PC or from a specific
IP address. Click Apply to save your settings.
NOTE: When enabling remote access, please make sure to change the default
administration password for security reason.
Action: Select Enable or Disable remote access function.
HTTPS Port: Please input the remote access HTTPS port you would like to
use.(default is 443)
Click Apply to apply your settings.
Click Create to add a Remote Access Table to specify the allowed remote access
addresses.