Billion Electric Company 30 Network Card User Manual


 
138
Tagged Member port(s): Please check the interface that you would like to use in
this VLAN ID group.
Untagged Member port(s): Please check the interface that you would like to use
in this VLAN ID group.
Click Apply to add this rule.
4.5 Save Configuration To Flash
After changing the router’s configuration settings, you must save all of the
configuration parameters to flash memory to avoid them being lost after turning off
or resetting your router. Click Apply to write your new configuration to flash
memory.
4.6 Logout
To exit the router’s web interface, click Logout. Please ensure that you have saved
your configuration settings before you logout.
Be aware that the router is restricted to only one PC accessing the web configuration
interface at a time. Once a PC has logged into the web interface, other PCs cannot
gain access until the current PC has logged out. If the previous PC forgets to logout,
the second PC can access the page after a user-defined period (5 minutes by
default). You can modify this value using the Advanced > Device Management
section of the Web Configuration Interface. Please see the Advanced section of this
manual for more information.