127
Interface: The current traffic type. This can be WAN1 (outbound, inbound) and
WAN2 (outbound, inbound).
Application: User defined application name for the current rule.
Packet Type: The type of packet this rule applies to. Choose from Any, TCP, UDP,
or ICMP.
Guaranteed: The guaranteed amount of bandwidth for this rule as a percentage.
Maximum: The maximum amount of bandwidth for this rule as a percentage.
Priority: The priority assigned to this service. Select a value from 0 to 6, 0 being
highest.
DSCP Marking: Used to classify traffic. Select from Best Effort, Premium, Gold
Service (High Medium, Low), Silver (H,M,L), and Bronze (H,M,L).
Address Type: The type of address this rule applies to. Select IP Address or MAC
Address.
Bandwidth Type:
Shared Bandwidth: Please select Shared Bandwidth if you would like the specified
bandwidth to be shared for all IP address in specified IP range.
Bandwidth per source IP Address: Please select Bandwidth per source IP
Address if you would like the specified bandwidth to be applied individually per
source IP address in specified IP range.
For IP Address:
Source IP Address Range: The range of source IP Addresses this rule applies to.
Destination IP Address Range: The range of destination IP Addresses this rule
applies to.
Source Port Range: The range of source ports this rule applies to.
Destination Port Range: The range of destination ports this rule applies to.