Billion Electric Company 30 Network Card User Manual


 
135
4.4.9.3 Device Management
The Device Management Advanced Configuration settings allow you to control your
router’s security options and device monitoring features.
Device Name
Name: Enter a name for this device.
Web Server Settings
HTTP Port: This is the port number the router’s embedded web server (for
web-based configuration) will use. The default value is the standard HTTP port, 80.
Users may specify an alternative if, for example, they are running a web server on
a PC within their LAN.
Management IP Address: You may specify an IP address allowed to logon and
access the router’s web server. Setting the IP address to 0.0.0.0 will disable IP
address restrictions, allowing users to login from any IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user’s
configuration session.
Example: User A changes HTTP port number to 100, specifies their own IP
address of 192.168.1.100 and sets the logout time to be 100 seconds. The router
will only allow User A access from the IP address 192.168.1.100 to logon to the Web
GUI by typing: http://192.168.1.254:100 in their web browser. After 100 seconds,
the device will automatically logout User A.
SNMP Access Control