Filter
Top Products
25
CHAPTER 6: Installation
6.2.2.B Attaching a Switch with a Single Compatible User-Port Connector
Run a ServSwitch-to-ServSwitch Expansion Cable (product code EHN284) from
the Local Unit’s CPU port to one of the KVM switch’s user ports, which will be
DB25 connectors.
Figure 6-3. Attaching a KVM switch with a single compatible user-port
connector to the Local Unit’s CPU port.
6.2.2.C Attaching a Switch with a Single Incompatible User-Port Connector
First plug the included three-to-one KVM-extension cable into the Local Unit’s
CPU port. Then plug a User Cable designed for the KVM switch into one of the
switch’s user ports. (For the ServSwitch Multi, you could use product code
KV2505.) Connect the matching strands of the KVM-extension cable and User
Cable together as shown in Figure 6-4.
Figure 6-4. Attaching a KVM switch with a single incompatible user-port
connector to the Local Unit’s CPU port.
Regular ServSwitch
(KV3108SA-R4)
(To CPUs)
Local
Unit
ServSwitch-to-
ServSwitch
Expansion Cable
(EHN284)
Included KVM-
extension Cable
Local Unit
ServSwitch
Multi EXP
(KV160A-R2)
User cable KV2505
(plugs into User Card)