Filter
Top Products
VideoJet X10 Appendix | en 107
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
8.4 LEDs
The VideoJet X10 network video server has a number of LEDs on its front and rear panels that
show the operating status and can give indications of possible malfunctions:
Power On LED
SFP LED
ETH 1 LED
ETH 2 LED
Connect LED
HDD LED
Does not light up: VideoJet X10 is switched off.
Lights up green: VideoJet X10 is switched on.
Does not light up: No connection.
Lights up yellow: Connection established.
Flashes yellow: Data being transmitted.
Does not light up: No network connection.
Lights up yellow: Network connection established.
Flashes yellow: Data being transmitted over the network.
Does not light up: No network connection.
Lights up yellow: Network connection established.
Flashes yellow: Data being transmitted over the network.
Lights up red: Startup in progress.
Lights up green: Startup complete, VideoJet X10 is operational.
Flashes green: Video connection established.
Flashes red: VideoJet X10 is faulty, for example following failed
firmware upload.
Does not light up: No hard drive fitted.
Lights up orange: Hard drive fitted.
Flashes orange: Hard drive activity.