Filter
Top Products
54 en | Configuration Using a Web Browser VideoJet X10
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
example. Once you have entered the IP address of the remote video device and saved it by
pressing Set, the VideoJet X10 is then displayed for selection in the Storage Management for
the remote video device.
IP Address
Enter the IP address for the remote video device.
1. If you do not know the IP address, click the Network Scan button. The search for
possible devices in the network is started. A small arrow is then displayed next to the IP
Address field.
2. Click the arrow to display the list of devices detected.
3. Click the required device in the list to transfer its IP address.
5.23 Advanced Mode: Recording Profiles
You can define up to ten different recording profiles. You will then use these recording
profiles in the recording scheduler, where they are linked with the individual days and times
(see Section 5.25 Advanced Mode: Recording Scheduler, page 57).