Filter
Top Products
VideoJet X10 Configuration Using a Web Browser | en 45
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
You can then view, edit and print this file with any text editor or the standard Office software.
File for system log
1. Enter the path for saving the system log here.
2. If necessary, click Browse to find a suitable directory.
5.17 Advanced Mode: Video Input
You can activate the 75 Ohm terminating resistance for the video input of the VideoJet X10.
The terminating resistance must be deactivated for the video signal to be looped through.
Every video input is closed at the time of delivery.
75 Ohm termination input 1
Select Off if the video signal is to be looped through.
Source type input 1
To allow VCRs to be connected as a video source, you can change the characteristic of the
video source from the preset value of Camera to VCR. VCRs require a more tolerant setting
for the internal PLL as a result of jitter effects caused by the mechanical components of a
VCR.
5.18 Advanced Mode: Picture Settings
i
NOTICE!
In some cases, selecting the VCR option can lead to an improvement in the video image even
with a camera connected.