Filter
Top Products
94 en | Operation VideoJet X10
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
6.3 Saving Snapshots
You can save individual images from the video sequence currently shown on the LIVEPAGE in
JPEG format on your computer's hard drive. The icon for recording single images is only
visible if the unit is configured to enable this process (see Section Allow snapshots, page 44).
X Click the icon. The image is saved at a resolution of 704 × 576 pixels (4CIF). The storage
location depends on the configuration of the VideoJet X10 (see Section Path for JPEG
and MPEG files, page 44).
6.4 Recording Video Sequences
You can save sections of the video sequence currently shown on the LIVEPAGE on your
computer's hard drive. The icon for recording video sequences is only visible if the unit is
configured to enable this process (see Section Allow local recording, page 44).
1. Click the icon to start recording. The storage location depends on the configuration of
the VideoJet X10 (see Section Path for JPEG and MPEG files, page 44). A red dot in the
icon indicates that recording is in progress.
2. Click the icon again to stop recording.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Section 5.19 Advanced Mode: Encoder Profile, page 47).
6.5 Running Recording Program
The hard drive icon below the camera images on the LIVEPAGE changes during an automatic
recording.
A moving graphic will appear to indicate a running recording. If no recording is taking place, a
static icon is displayed.
i
NOTICE!
You can play back saved video sequences using the Player from Bosch Security Systems,
which can be installed from the product CD supplied (see Section 3.1 Scope of Delivery,
page 11).