Filter
Top Products
ABOUT THIS PRINTER 1 - 14
Guidelines for selecting paper
The printer is designed to work well with most types of xerographic and bond paper. However, some
paper variables may have an effect on print quality or handling reliability. Always test samples of paper
before purchasing to ensure desirable performance. Some important guidelines when selecting paper
are:
■ Supplier should be informed that the paper or envelopes will be used in a laser printer.
■ Preprinted paper must use inks that can withstand the temperature of the printer's fusing process.
(200 degrees centigrade)
■ If you have selected a cotton bond paper, paper having a rough surface, such as cockle or laid
finished paper or paper that is wrinkled or puckered, the paper may exhibit degraded performance.
Types of paper to avoid
Some types of paper may not perform well or may cause damage to your printer.
Do not use paper:
■ that is highly textured
■ that is extremely smooth or shiny
■ that is curled or warped
■ that is coated or has a chemical finish
■ that is damaged, creased or folded
■ that exceeds the recommended weight specification in this guide
■ with tabs and staples
■ with letterheads using low temperature dyes or thermography
■ that is multipart or carbonless
■ that is designed for inkjet printing
If you use any of the types of paper listed above, they may damage your printer. This damage is not
covered under any Brother warranty or service agreement.
The manufacturer does not recommend the use of any particular paper. The operator is responsible
for the quality of paper used with the printer.