Filter
Top Products
CONTROL PANEL 3 - 17
INTERFACE
Display Shows Description
SELECT =AUTO/USB/PARALLEL/NETWORK
AUTO IF TIME = 1:99 (sec)
You need to set the time-out period for the auto interface selection.
INPUT BUFFER = Level1:15
Increases or decreases the input
buffer capacity.
RESTART PRINTER?
PARALLEL When using the parallel interface
Subsetting Description
HIGH SPEED =ON/OFF
Turns high-speed parallel communications on or
off.
BI-DIR =ON/OFF
Turns bi-directional parallel communications on
or off.
USB2.0 HIGH SPEED =ON/OFF
Turns high-speed USB2.0 communications on
or off.
RESET MENU
Display Shows Description
RESET PRINTER Resets the printer and restores all printer settings (including command settings) to
settings you have previously made with the control panel buttons.
FACTORY RESET Resets the printer and restores all printer default settings (including command
settings) to the factory settings. See List of factory settings on page 3-22.
PARTS LIFE Subsetting Description
OPC BELT Resets the OPC Belt parts life.
Appears when you need to replace the OPC
belt.
FUSER UNIT Resets the Fusing Unit parts life.
Appears when you need to replace the Fusing
unit.
120K KIT Resets the 120K Kit parts life.
Appears when you need to replace the 120K Kit.
PF KIT2 Resets the PF kit2 parts life.
Appears when you need to replace the PF Kit2.