Filter
Top Products
2 - 3 GETTING STARTED
Setting the Phone Line Type
If you are connecting the machine to a line that features a PBX or
ISDN to send and receive faxes, it is also necessary to change the
Phone Line Type accordingly by completing the following steps.
1
Press Menu/Set, 0, 6.
2
Press ▲ or ▼ to select PBX, ISDN (or Normal).
Press
Menu/Set.
3
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange.
Your machine can be connected to most types of PBX. The
machine’s recall feature supports timed break recall only (TBR). TBR
will work with most PBX systems allowing you to gain access to an
outside line, or transfer calls to another extension. The feature works
when the
Mute/R key is pressed.
You can program a Mute/R key press as part of a number
stored in a Speed-Dial location. When programming the
Speed-Dial number (
Menu/Set, 2, 3, 1) press Mute/R first (the
screen displays ”!”), then enter the telephone number. If you do
this, you do not need to press
Mute/R each time before you dial
using a Speed-Dial location. (See Storing numbers for easy
dialling on page 5-1.) If you have not set the Phone Line Type
setting to PBX you cannot use any Speed-Dial numbers that
have a
Mute/R key press as part of the number.