Filter
Top Products
4 - 8 SETUP RECEIVE
Printing a fax from the memory
If you have selected Fax Storage (Menu/Set, 2, 5, 1), you can still
print a fax from the memory when you are at your machine. (See
Setting Fax Storage on page 6-2.)
1
Press Menu/Set, 2, 5, 3.
2
Press Mono Start.
Reception into memory
(Monochrome only)
As soon as the paper tray becomes empty during fax reception, the
screen will display No Paper Fed; please put some paper in the
paper tray. (See How to load paper, envelopes and post cards on
page 1-14.)
If the Memory Receive is On at this time...
The current fax reception will continue, with the remaining page(s)
being stored in memory, subject to available memory. Subsequent
incoming faxes will also be stored into memory until the memory is
full, following this no further incoming fax calls will be automatically
answered. To print all data put fresh paper in the paper tray and
press
Mono Start or Colour Start.
If the Memory Receive is Off at this time...
The current fax reception will continue, with the remaining page(s)
being stored in memory, subject to available memory. Subsequent
incoming fax calls will not be automatically answered until fresh
paper is put in the paper tray. To print the last fax received, put paper
in the paper tray and press
Mono Start or Colour Start.
1
If it is not illuminated in green, press (Fax).
2
Press Menu/Set, 2, 1, 6.
3
Use ▲ or ▼ to select On (or Off).
Press
Menu/Set.
4
Press Stop/Exit.