Brother 3600 Printer User Manual


 
92
TROUBLESHOOTING
(8) The tape is not ejected correctly after
being automatically cut.
Turn off the machine, open the tape com-
partment cover, and remove the tape cas-
sette if one is installed.
Using a cotton swab, clean off the metal
piece in the exit slot to the left of cutter.
(9) The cutter does not cut correctly.
Change the HALF CUTTER setting. (Refer
to page 81.)
The cutter may be dull. Contact your serv-
ice representative.
Problem Solution
Cotton swab
Metal piece
(Area to be cleaned)