Brother 3600 Printer User Manual


 
88
ERROR MESSAGE LIST
TEXT TOO HIGH!
This message appears if the size
of the text is larger than the
width of the installed tape.
(PT-9600 only) This message
appears if the Lines of Text set-
ting for the ESC/P interface
mode exceeds the maximum
possible for the installed tape.
Reduce the size of the
characters, install a tape
with a greater width or
select the AUTO text size
setting.
Specify the correct setting
for the installed tape.
TEXT TOO LONG!
This message appears if the
length of the text is longer than
the label length that has been
set with the Tape length func-
tion.
This message appears if you try
to print a label that is longer
than the maximum label length.
This message appears if you try
to print a label that is longer
than the maximum label length
or is longer than the specified
block length.
This message appears if the
length of the text is longer than
the width of the tape when the
Text rotation function is used.
Delete some of the text,
reduce the character
width, or increase the set
label length.
Delete some of the text or
reduce the character size.
VALUE OUT OF RANGE!
CHECK VALUE AND
RE-ENTER.
This message appears if the
value entered while setting the
Tape margin, Tape length,
Block margin and Block length
function is not within the allow-
able range.
This message appears if the
specified characters cannot be
found in the database.
This message appears if the val-
ues for the records to be printed
is not within the allowable
range.
Type in a value that is
within the allowable
range.
WRONG ADAPTER!
This message appears if an
extremely high-voltage or
extremely low-voltage adapter
is being used.
Disconnect the adapter,
and connect the adapter
designed exclusively for
this machine.
WRONG CHARACTER!
This message appears if a time
stamp or user-defined character
image is selected when you try
to use the Numbering function.
Select text or a barcode
before trying to use the
Numbering function.
ERROR MESSAGE CAUSE SOLUTION