Brother 3600 Printer User Manual


 
84
ERROR MESSAGE LIST
CUTTER ERROR!
This message appears if the cut-
ter did not operate correctly.
Turn off the P-touch, and
then turn the P-touch on
again.
If the problem cannot be
corrected, contact your
service representative.
DIVIDE BY ZERO
ERROR!
This message appears if the
conversion rate entered when
setting up the Euro conversion
function was 0.
Type in a conversion rate
other than 0.
EEPROM ERROR!
This message appears if a
checksum error occurred when
the P-touch was turned on or if
the keyword was damaged and
failed to initialize.
Contact your service rep-
resentative.
INPUT WHOLE CODE!
This message appears if the set
number of digits is not entered
in the barcode data.
Input the correct number
of digits or change the
number of digits set in the
barcode parameters.
ERROR MESSAGE CAUSE SOLUTION