Filter
Top Products
58
Ch. 3 Functions
Functions
4 Press r (OR press n) to apply the setting.
Line effects function
(LINE EFFECTS)
The Line effects function enables you to under-
line or strike out certain parts of your text.
When any setting other than OFF is selected for
the text at the cursor’s current position, the Line
effects indicator at the top of the display comes
on.
To change the setting for the Line effects
function:
1 Select GLOBAL FORMAT, BLOCK FOR-
MAT or LINE FORMAT (OR hold down
d and press 1, 2 or 3) as described
on pages 52 to 53.
2 Rotate r until LINE EFFECTS is displayed,
and then press r (OR press j or k until
LINE EFFECTS is displayed). The setting for
the text at the cursor’s current position is
shown on the left side of the display and a
sample can be seen on the right side.
3 Rotate r (OR press m or g) until the
desired setting is displayed.
4 Press r (OR press n) to apply the setting.
Frame function (FRAME)
With the Frame function, you can choose from a
variety of frames and highlights for emphasising
certain parts or all of the text in your label. For
samples of the available frame settings, refer to
page 104. When any setting other than OFF is
selected for the text at the cursor’s current posi-
tion, the Frame indicator at the top of the dis-
play comes on. The lines on the right side of the
indicator, starting from the top, show if the
Frame setting is applied to the entire text, the
block or the line.
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several format set-
tings at the same time, press j or k to select the
function, and then press m or g to select the
desired setting. Press n only after the necessary
functions have been set.
NOTE
This step may be skipped if settings for several for-
mat functions are being applied at the same time.
OFF STRIKEOUT
UNDERLINE
Length Margin Font Width Size
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
L
M
NO
AUTO 0.4 HELSINKI A AUTO
<<< P-touch >>>
1
:
_
NOTE
☞
If “*****” appears as a setting, the Line effects
function has already been applied to either a
line in the current text block (if the Block format
or the Global format function is being set) or a
block in the current text (if the Global format
function is being set). Changing the setting will
cancel the setting that was previously applied.
☞
To return the function to its default setting
(OFF), press the space bar.
☞
To return to the text without changing the for-
matting, press e (OR hold down d and
press 1, 2 or 3).
NOTE
If r is used to select the settings, only one function
can be set at a time. To apply several format set-
tings at the same time, press j or k to select the
function, and then press m or g to select the
desired setting. Press n only after the necessary
functions have been set.
Length Margin Font Width Size
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
K
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
R
R
R
R
R
R
G
H
I
J
AUTO 0.4 HELSINKI A AUTO
06/13
LINE EFFECTS
OFF
L
M
NO