Filter
Top Products
97
Characters in the blocks of your message can be horizontally aligned in any one of
four ways:
LEFT
CENTER
RIGHT
JUSTIFY
+ The horizontal alignment setting can only be applied to the entire label.
It cannot be applied to just part of the text.
If a tape length has been set, multi-block message are assigned the
JUSTIFY setting and spaces between the blocks are adjusted so that the
text spreads out evenly the tape.
TO SELECT A HORIZONTAL ALIGNMENT:
(1) Press the FORMAT key.
(2) Press the 4 and 3 keys until the horizontal alignment setting (H.ALI) is high-
lighted.
(3) Press the 5 and 6 keys until the setting you wish to use is displayed.
+ The default setting (LEFT) can be selected by pressing the SPACE key.
(4) Press the RETURN key.