Filter
Top Products
11
This machine is equipped with a jack which allows you to print stamp and
labels that you create with the P-touch EDITOR software installed on your IBM
or compatible PC.
TO CONNECT THE COMPUTER:
(1) Be sure both the P-Touch 580C and the computer are turned off.
(2) Insert the small plug on the connection cable into the jack marked
INTERFACE on the right of the P-Touch 580C.
(3) Insert the large plug into the COM port of your IBM computer.
+ Use the plug that is compatible with the COM port on your computer
and leave the other plug unconnected.
(4) Turn on the P-Touch 580C, then start up the computer.
+ Hold down the CODE key and press the INTERFACE key on the
P-Touch 580C to enter Interface mode.
Only use the connection cable designed exclusively for this machine.