Filter
Top Products
123
ERROR MASSAGE CAUSE REMEDY
LENGTH LIMIT!
•The length of one label message
is limited to one meter.
This message appears if a chara-
cter, symbol, diacritical mark, bar
code, space, return or new block
is entered, causing the text to
exceed the one meter limit.
•This message appears if the
entered text exceeds the one
meter limit when the power is
turned on or while trying to print.
•This message appears if a
file is recalled and joined to
the current message, causing
the text to exceed the one meter
limit.
•This message appears if the
RETURN key is pressed in
Format mode, causing the text
to exceed the one meter limit.
•Delete some of the text or
reduce the character size.
•Delete some of the text or
reduce the character size.
•Press the CANCEL key and
delete some of the text before
recalling the file or joining the
working area text and the file.
• Press the CANCEL key and
delete some of the text before
entering a frame or other gro-
bal format setting.
LINE LIMIT!
•This message appears if the
number of lines in the text is
greater then the maximum
number of lines possible for
the installed tape.
•Reduce the number of lines
or install a tape of greater
width.
MEMORY FULL!
•This machine can store about
3,400 characters in its memory.
This message appears when you
try to store a message that is too
large to fit in the available memory
space.
•Stop trying to store the mes-
sage or delete an unwanted
file to make room for the new
one.
NO FILES!
•This message appears if you
try to recall or delete a text file
from the memory when none
are currently stored.
•Do not attempt to recall or
delete a text file.
NO TAPE!
•This message appears if you
attempt to print a label or feed
the tape when a tape cassette
is not installed.
•Install a tape cassette and
try again.