Filter
Top Products
48
The power button is located in the top right-hand corner of the machine’s key-
board. When the power is turned on, the previous session’s information is dis-
played. The machine will automatically turn off if no key is pressed within 5
minutes. In Interface mode, however, the machine will automatically turn off if
it is not used for 10 minutes.
If batteries have been installed in the machine or if it has been plugged in using
the optional AC adaptor, the machine’s internal memory will retain the last
message created and display it after the machine is turned on. This automatic
backup feature allows you to stop work on a message, turn off the machine and
return to later without having to re-enter the message.
+ When the AC adaptor is plugged into the machine, unplugging the adap-
tor from the AC outlet can delete the contents of the memory, even if bat-
teries are installed.
If six AA alkaline batteries have been installed or if the machine is plugged into
an AC outlet using the AC adaptor, all data in the machine’s memory will be
retained. When changing the batteries, be sure to insert the new ones within
five minutes of removing the old batteries, otherwise the messages in the work-
ing area and the memory will be lost.
The power button can also be used to “reset” the machine. This reset function
is useful in two situations:
TO RESET THE MACHINE:
(1) Turn the power off.
(2) Hold down the CODE and R key and turn the power back on.
Since all text files and format setting changes will be cleared from the memory
this should be done only as a last resort.