Filter
Top Products
124
ERROR MESSAGE CAUSE REMEDY
NUMBERING BUFFER
FULL
•This message appears if the
RETURN key is pressed in
Seq. numbering mode when
the working area buffer is alre-
ady full.
•Press the CANCEL key and
delete some of the text befo-
re entering Seq. numbering
mode.
OPEN
THE COVER!
•This message appears when
the tape compartment cover
is closed while rewinding the
tape during multi-color printing.
•Open the compartment cover,
then press the RETURN key.
RAM PROBLEM!
•This message appears if there
is a problem with the machine’s
random access memory.
•Contact your service reper-
sentative.
REPLACE BATTERIES!
•This message appears when the
installed alkaline batteries are
about to run it.
•Replace the batteries or use
the AC adaptor.
ROM PROBLEM!
•This message appears if there
is a problem with the machine’s
read only memory.
•Contact your service reper-
sentative.
SYSTEM ERROR!
•This message appears if there
is a problem with the machine’s
software.
• Contact your service reper-
sentative.
TOO HIGH!
•This message appears if the size
of the text is larger then the width
of the installed tape.
•Reduce the size of the char-
acters or install a tape of gra-
ater width.
TOO LONG!
•This message appears if the width
of the text is longer then the label
length that has been set.
•This message appears if the text
inputted as an entry in Auto format
mode exceeds the preset length.
•Delete some of the text, re-
duce the character width or
increase the preset label le-
ngth.
•Enter fewer characters.
WRONG SELECT
•This message appears if more
then five characters are selected
as the numbering field.
•This message appears if charac-
ters with different format settings
are selected as the numbering
field.
•Limit the numbering field to
five characters.
•Only select characters with
identical format settings.