Filter
Top Products
10
The AC adaptor (model AD-30) allows you to use this machine anywhere a
standard electrical outlet is available.
TO ATTACH THE AC ADAPTOR:
(1) Insert the small plug on the adaptor into the jack marked DC IN 7V on the
right side of the machine.
(2) Insert the large plug into the nearest standard electrical outlet.
+ Only use the AC adaptor designed exclusively for this machine.
Remove the batteries and disconnect the AC adaptor if you do not
intend to use your machine for an extended period of time. When the
power is disconnected, all messages in the working area and the mem-
ory will be lost.
It is recommended that you use the AC adaptor when printing large
fonts and bar codes on 3/4” (18-mm)- or 1” (24-mm)-wide tape since
there operations can quickly run down the batteries.