Filter
Top Products
114
TO ENTER A BAR CODE INTO YOUR MESSAGE:
(1) Hold down the CODE key and press the BARCODE key. If the cursor is
located in a bar code that has already been entered, the current bar code
settings will be displayed.
(2) Enter the bar code data. If you wish to edit an existing bar code, enter the
new data.
To edit the bar code settings:
(3) Press the FORMAT key.
(4) Press the 4 and 3 keys until the first setting you wish to change is highlighted.
(5) Press the 5 and 6 keys until the desired setting is displayed.
(6) Repeat steps (4) and (5) until the settings are as you wish.
(7) Press the RETURN key.
(8) Hold down the CODE key and press the SYMBOL key, then press the 5 and 6
keys until the appropriate symbol is displayed.
The following symbols can only be entered when using protocols EAN 128 or CODE
128.
VALUE CHARACTER VALUE CHARACTER VALUE CHARACTER
3 # 71 BEL 89 EM
4 $ 72 BS 90 SUB
11 + 73 HT 91 ESC
28 < 74 LF 91 {
29 = 75 VT 92 FS
30 > 76 FF 92 |
32 @ 77 CR 93 GS
59 [ 78 SO 93 }
60 \ 79 SI 94 RS
61 ] 80 DLE 94 ~
63 - 81 DC1 95 US
64 NUL 82 DC2 95 DEL
65 SOH 83 DC3 96 FNC 3
66 STX 84 DC4 96 FNC 2
67 ETX 85 NAK 100 FNC 4