Filter
Top Products
37
Ch. 2 Getting Started
Getting Started
Ironing
Iron garments with transfers using normal tem-
perature settings.
Be sure to place a piece of cloth between the
iron and the label when you iron over it to pre-
vent the label from sticking to the iron.
The labels are non-toxic, however, please main-
tain the usual precautions, such as not placing
them in your mouth, etc.
Fabric tape
Fabric tape is used to attach a piece of fabric
printed with your text onto garments using an
iron. After printing the text onto fabric tape and
cutting off the label using scissors
, place the
label on an ironed garment at the location
where you wish to attach it in such a way that
the printed text can be read correctly. Cover the
label with another piece of cloth and use an
iron set to a medium-high temperature (160 to
180 °C) to press down firmly for 15 to 30 sec-
onds. For more details, refer to the instructions
included with the fabric tape cassette.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Assembling stamps
In addition to labels, your P-touch can be used
to make custom, pre-inked stamps for various
uses (optional stamp kit required). Simply design
your own customised stamps using one of the
pre-formatted stamp templates, and then affix
the printed stamp stencil to a self-inking stamp
film holder.
1 Install a stamp film cassette, and then for-
mat the stamp text in either of the following
ways:
a) Select a pre-formatted stamp template
from those available with the Auto for-
mat function (refer to page 65).
b) Type in text, and then set the Stamp func-
tion to ON (refer to page 64).
2 Print out the stamp stencil and remove its
backing paper.
3 Remove the frame from around the stamp
holder ink pad, one end at a time, and then
remove the protective seal covering the ink
pad.
4 With the glossy side of the stamp film facing
up, align one end of the stamp film with the
slit in the side of the stamp holder.
P-TOUCH
NOTE
If an Auto format stamp template is used, it is not
necessary to set the Stamp function to ON.
NOTE
☞
If the stamp holder already contains a stamp
film, hold the stamp over a piece of scrap paper
and remove the stamp frame by pulling it off,
one end at a time. Then, slowly peel off the
stamp film. Be careful that the ink does not
splatter.
☞
Keep the stamp film holder out of the reach of
children.
☞
Avoid getting ink in your eyes or mouth. If ink
gets in your eyes or mouth, immediately wash it
with fresh water for several minutes and consult
a doctor.
☞
Keep ink off skin, clothes and important papers.
Immediately use soap to wash skin that has
come in contact with ink. Even washing may
not remove all ink.