Filter
Top Products
13
3
3
Power Save mode 3
When the machine is idle, you can put the
machine into Power Save mode by pressing
the Power Save key. You can still receive
telephone calls in Power Save mode. For
further information on receiving faxes in the
power save condition, please see the table on
page 13. If you want to do other operations,
you must take the machine out of Power Save
mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode 3
a Press and hold down the Power Save
key until the LCD shows
Shutting Down.
The LCD light goes off.
Bringing your machine out of
Power Save mode 3
a Press Power Save key.
Note
• Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
• If you unplug the AC power cord, no
machine operations will be available.
• You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 13.)
Power Save setting 3
You can customize the machine's
Power Save key. The default mode is
Fax Receive:On. Your machine can
receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to Fax Receive:Off. (See
Power Save mode on page 13)
a Press Menu, 1, 5.
b Press a or b to choose
Fax Receive:On, or
Fax Receive:Off.
Press OK.
c Press Stop/Exit.
1
You cannot receive a fax with Start.
2
(FAX-1360) You can receive telephone calls by lifting
the handset.
3
FAX-1360
4
(FAX-1355) You cannot receive a fax automatically
even if you have set the receive mode to Fax/Tel.
5
Should be set before you switch off the machine.
General setup 3
FAX-1355 and FAX-1360
On/Off
setting
Receive
mode
Available operations
Fax
Receive:
On
12
(factory
setting)
Fax Only
Fax/Tel
3
External
TAD
Fax Receive
Fax Detect
Delayed Fax
5
Fax Forward
5
Fax Storage
5
Remote Retrieval
5
Manual
Fax/Tel
4
Fax Detect
Delayed Fax
5
Fax
Receive:
Off
— No machine operations
will be available other
than cleaning the print
head.