Filter
Top Products
Chapter 9
48
Listening to your OGM 9
a Press Menu, 2, 7, 1.
b Press a or b to choose TAD Message
or F/T Message, then press OK.
c Press a or b to choose Play MSG.
Press OK.
d Press Stop/Exit.
Erasing your OGM 9
a Press Menu, 2, 7, 1.
b Press a or b to choose TAD Message
or F/T Message, then press OK.
c Press a or b to choose Erase MSG.
Press OK.
d Do one of the following options:
Press 1 to erase the OGM.
Press 2 to exit without erasing.
e Press Stop/Exit.
Fax/Tel OGM 9
If your machine is set to Fax/Tel receive
mode, this message will be played by your
Brother machine to a caller. Unlike the TAD
OGM, the caller will not be able to leave a
message. The purpose of the fax/tel OGM is
to let the caller know that their call will be
answered shortly.
To record your Fax/Tel OGM follow the
instructions page 47. If you need to review
the steps for setting up the Fax/Tel receive
mode, Receive modes on page 28.
Activating TAD memory 9
When the light glows, TAD mode is
active. Press to enter TAD mode.
Managing your
messages
9
Message Indicator 9
The light flashes if you have any new
messages waiting for you.The LCD displays
the total number of voice and fax messages
stored in the TAD memory.
Voice:03 Fax:00
Fax messages are only stored when Fax
Storage is turned on. To turn fax storage on
press Menu 2, 5, 1.
Playing voice messages 9
All messages are played in the order they
were recorded. The LCD shows the number
of the current message, the total number of
messages, and the time and date the
message was recorded. Follow the steps
below to listen to your voice messages:
a Press Play/Record or Play.
The following commands are available
when playing messages:
b Press Stop/Exit.
l Repeats a message
# Skips to the next message
or
Adjusts the volume