Filter
Top Products
Troubleshooting and Routine Maintenance
87
c Open the new ink cartridge bag, and
then take out the ink cartridge.
d Remove the protective yellow cap (1).
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow cap comes off
when you open the bag, the cartridge will
not be damaged.
e The ink cartridge has its own correct
position. Insert the ink cartridge in the
direction of the arrow on the label.
f Lift the lock release lever gently and
push it until it clicks, and then close the
ink cartridge cover.
g If you replaced an ink cartridge, the LCD
may ask you to verify that it was a brand
new one. (For example,
Did You Change Blck?) For the
new cartridge you installed, press 1
(Yes) to automatically reset the ink dot
counter. If the ink cartridge you installed
is not a brand new one, be sure to
press 2 (No).
If you wait until the LCD shows
Near Empty Black and
Ink Empty Black, the machine will
automatically reset the ink dot counter.
Note
If the LCD shows No Cartridge after
you install the ink cartridge, check that the
ink cartridge is installed properly.
1