Filter
Top Products
20
CHAPTER TWO
3
End your message by giving your Remote Activation Code for
people sending manual faxes. For example:
“After the beep, leave a message or send a fax manually by pressing
51.”
Please note that some faxes that are sent manually cannot be received
automatically because some fax machines do not send a fax tone in
manual mode. In these cases you must inform callers that they must enter
the remote activation code to send a fax.
Sequence of External TAD Reception
When you leave your machine set in TAD mode, all calls will be
answered by the externally connected telephone answering device, and
fax calls will be received automatically provided they come from a
machine which sends standard CalliNG tone (CNG).
Incoming Call
The call is picked up
by the TAD.
(Recommended short
TAD ring delay such
as 1 or 2 rings.)
The external TAD
outgoing message
begins (recommended
length of 10 seconds
or less).
The caller leaves a
voice message on the
external TAD.
The caller must press
Start or enter your
remote activation
code to activate the
machine and press
Start.
The fax message is
received on paper.
The caller can also
send a fax message
after the voice message.
Manual
fax call
Auto dial
fax call
Fax reception is
automatically
activated by
fax tone.
The fax message
is received on
paper.
Voice call