Filter
Top Products
27
ON-SCREEN PROGRAMMING
2. SETUP RECEIVE
Function Description Factory Set Chapter
1. RING DELAY Number of rings before the
RING DELAY:02
5
machine answers in F/T, FAX
TOLL SAVER:OFF
or TAD (Message Manager)
(FAX-930 and FAX-
mode.
940 E-mail Only)
2. F/T RING TIME Sets the time for “F/T pseudo- 30 5
ring” in F/T mode.
3. FAX DETECT Receive fax messages without ON 5
pressing the Start key.
4. REMOTE CODE Enter code to activate or OFF 5
deactivate machine from a (
51, #51)
remote location.
5. REDUCTION Reduces size of image. AUTO 5
6. MEM.RECEIVE Automatically stores any ON 5
incoming faxes in its memory
if it runs out of paper.
7. POLLING RX You call another fax machine to -- 5
receive a fax from it.
8. PC INTERFACE Fax Receive Only/PC Priority/
PC PRIORITY
See Quick
(With MFL Pro for Fax) PC Receive Only Start Guide
for MFL
Pro for Fax
3. SETUP SEND
Function Description Factory Set Chapter
1.
COVERPG SETUP
Automatically sends a cover OFF 6
page you program or prints a
sample coverpage.
2.
COVERPAGE NOTE
Program customized message -- 6
for fax cover page.
3. CONTRAST Change lightness or darkness of AUTO 6
a fax you are sending.
4. RESOLUTION Allows you to change STANDARD 6
resolutions page by page.
5. OVERSEAS MODE Adjusts for sometimes difficult OFF 6
overseas transmissions.
6. CALL RESERVE You can send a fax, then speak OFF 6
or print a sample call back
message.
7. TIMER Send documents later. -- 6
8. POLLED TX Set Polled Transmission for -- 6
someone to poll your fax
machine to receive a fax.