Brother FAX-827 Fax Machine User Manual


 
Important information
12 - 2
15
This product has no mains ON/OFF switch. It is therefore
highly important that access to the mains plug and the mains
socket to which the plug is connected, is never obstructed, in
case for some reason the mains power to the machine must
be quickly disconnected.
16
Unplug this product from the power socket and refer servicing
to Authorized Service Personnel under the following
conditions:
When the power cord is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the
operating instructions are followed. Adjust only those
controls that are covered by the operating instructions.
Improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
If the product has been dropped or the cabinet has been
damaged.
If the product exhibits a distinct change in performance,
indicating a need for service.
17
To protect your product against power surges, we
recommend the use of a power protection device (Surge
Protector).
Important Information for New Zealand
Important Safety Instructions
1
Read all of these instructions.
2
Save them for later reference.
3
Follow all warnings and instructions marked on the product.
4
Unplug this product from the telephone and AC sockets (in
this order) before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
5
Do not use this product near water.
6
The grant of a Telepermit for any item of terminal equipment
indicates only that Telecom has accepted that the item
complies with minimum conditions for connection to its
network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all,
it provides no assurance that any item will work correctly in all
respects with another item of Telepermitted equipment of a
different make or model, nor does it imply that any product is
compatible with all of Telecom’s network services.
7
This equipment does not fully meet Telecom’s impedance
requirements. Performance limitations may occur when used
in conjunction with some parts of the network. Telecom will
accept no responsibility should difficulties arise in such
circumstances.