Filter
Top Products
11 - 2
Making copies
Copy options: Single or Multiple copies, Sort/Stack,
Reduce/Enlarge
You can choose additional copy options. First, you can select the
number of copies. Next, you can choose whether multiple copies
will be STACKED (all copies of page 1, then all copies of page 2,
etc.) or SORTED (collated). Finally, you can choose an
enlargement or reduction ratio. To automatically reduce the copy
to the paper size you have set for the paper tray, select AUTO. To
reduce the copy by a fixed percentage, choose 93%, 87%, 75% or
50%. Or, to enlarge the copy, select 150%, 125% or 120%. To copy
a document at its document size, select 100%.
1
Insert the document face down in the ADF.
2
Press Copy/Reports.
3
Enter the number of copies
you want (1-99).
To start copying now, press
Copy/Reports.
If you would like to select additional copy options, like
SORT, ELG/RDC (Enlarge or Reduce) press Menu/Set.
4
Press ▲ or ▼ to select SORT or STACK.
To start copying now without enlarging or reducing, press
Copy/Reports.
To reduce or enlarge the
image, press Menu/Set.
5
Press ▲ or ▼ to select an
enlargement or reduction ratio.
6
Press Copy/Reports.
If you are making multiple copies and get a OUT OF MEMORY
message while you are scanning the first page, press
Stop/Exit to cancel the job. Then make a single copy. If you
selected SORT and the OUT OF MEMORY message appears
while scanning subsequent pages, you can press
Copy/Reports to copy the portion that is in memory, or press
Stop/Exit to cancel. To restart the copy job using less
memory, press Copy/Reports for stacked copies.
The default resolution for multiple copies or reducing and
enlarging copies is FINE. Set the resolution to S.FINE for
small print or artwork and PHOTO for photographs by using the
Resolution key. S.FINE and PHOTO resolutions use up more
memory than FINE mode.
NO.OF COPIES:01
THEN COPY OR SET
ELG/RDC:100%
SELECT ↑ ↓ & SET