Filter
Top Products
5 - 2
Setup Receive
To select or change your Receive Mode
1
Press Receive Mode.
The LCD shows your current selection.
The options on FAX-817/827
are:
The options on FAX-837MC
are:
Or, if TAD Mode is switched
ON by pressing (Digital
TAD button), it overrides your
Receive Mode setting, so the
display shows:
2
Continue to press Receive Mode until your new selection
appears. After 2 seconds, the screen returns to the date and
time display, along with your new Receive Mode setting.
Setting the Ring Delay
The Ring Delay sets the number of times the fax machine rings
before it answers in FAX ONLY or FAX/TEL and MC:MSG CTR
modes. (FAX-837MC only)
1
Press Menu/Set, 2, 1.
If you have a FAX-817/827, go to Step 3.
2
Press ▲ or ▼ to select RING DELAY, and press Menu/Set.
3
Press ▲ or ▼ to select how many times the line rings before
the machine answers, and press Menu/Set.
4
Press Stop/Exit.
If you are changing the Receive Mode while in another
operation, the screen returns to the current operation display.
(FAX-837MC only)
■ Toll Saver must be OFF to use the Ring Delay setting.
■ With Ring Delay set to 2 rings, the fax machine will ring
twice and extention phones may ring 4-5 times before the
fax machine answer the call. (Fax machine begins ringing
on the third ring.)
09/06 15:25 FAX
Current Receive Mode
MNL: MANUAL
FAX: FAX ONLY
F/T: FAX/TEL
TAD:ANSWER MACH.
(FAX-817/827)
MC:MSG CTR
(FAX-837MC only)
FAX ONLY
FAX/TEL
TAD:ANSWER MACH.
MANUAL
FAX ONLY
FAX/TEL
MANUAL
MC:MSG CTR