Brother FAX-827 Fax Machine User Manual


 
Setup Send
6 - 13
Out of Memory message
If you get an OUT OF MEMORY message while scanning the first
page of a fax, press Stop/Exit to cancel the scan. If you get an
OUT OF MEMORY message while scanning a subsequent page,
you will have the option to press Fax Start to send the pages
scanned so far, or to press Stop/Exit to cancel the operation.
Interrupting Delayed Fax and Polled Transmit jobs
Even if you have your machine set to send a fax later, or if you have
it set to be polled, you can interrupt the scheduled job to send a fax
or make a copy now. However, you cannot use automatic redial or
the Menu mode.
1
Press Menu/Set, 5.
2
Wait 2 seconds, then remove
the documents that are waiting in the ADF.
3
Insert the document you want to send now in the ADF.
4
Enter the number for the fax you want to send now, and press
Fax Start.
5
After the transmission is finished, return the first document to
the ADF.
6
Press Menu/Set, 5 to restore the Delayed Fax or Polled
Transmit.
TX Lock System
TX Lock lets you prevent unauthorised access to the fax machine.
While TX Lock is ON, the following operations are available:
Receiving faxes
Answering calls
Fax Forwarding (If Fax Forwarding was already ON.)
Remote Retrieval (If Fax Storage was already ON.)
While TX Lock is ON the following operations are NOT available:
Sending faxes
Copy
If the faxes you send are typically very large or detailed, you
may get OUT OF MEMORY errors frequently. If this happens,
change the Memory Transmission setting back to OFF.
If you set Delayed Fax or Polled Transmit using the memory
(that is, if you have already scanned the document into your
machine’s memory and will send it from there), you don’t have
to interrupt to send a fax or make a copy.
You will not be able to continue to schedule Delayed Faxes or
Polling jobs. However, any pre-scheduled Delayed Faxes will
be sent when you turn TX Lock ON, so they won't be lost.
If you have selected Fax Forwarding or Fax Storage (For
FAX-817/827: Menu/Set, 8, 1 or for FAX-837MC: Menu/Set,
8, 2) before you turn TX Lock On, then Fax Forwarding and
Remote Retrieval will continue to work.
To print the faxes in memory, turn TX Lock OFF.
5.INTERRUPT