Filter
Top Products
USER’S GUIDE
4–48
To select the font and symbol set in the HP PCL5C mode, follow these
steps:
1. Press the
Sel
button to set the printer off-line.
2. Press the
Font
button and then press the ▲ or ▼ button to select the
primary or secondary font setting menu.
.
3. Press the
Set
button.
The display shows the font setting menu. You can skip the font setting
menu and advance to the symbol set setting menu with the ▲ or ▼
button.
✒ Note
The last lowercase letter “p” or “s” indicates the primary or secondary
font setting mode. If you select the secondary font setting mode, the
display shows “s” in the following messages.
4. Press the
Set
button.
When you enter the “SELECT FONT” menu, you can select the
internal font, optional slot font, or permanent download font.
Press the ▲ or ▼ button until the desired font source appears on the
display.
Display Message Font Source
INTERNAL FONT Internal font of the printer
CARD1 FONT Optional card font in slot 1
CARD2 FONT Optional card font in slot 2
PERMANENT FONT Permanent download font defined
in the HP emulation mode
Since these steps instruct you how to select the standard font, select
the “INTERNAL FONT” message.
✒ Notes
When you select the optional fonts or permanent download fonts, note the
following:
If the optional font cartridge/card is not installed, the optional font
cannot be selected. No selection appears on the display.
If permanent fonts are not downloaded in the HP emulation mode or
another emulation mode is selected, they cannot be selected. No
selection appears on the display.
The list you can print out with the
Test
button helps you to select the
optional fonts or permanent download fonts. See “TEST button” in
this chapter or “Selecting the Optional Fonts” in Chapter 5.