Filter
Top Products
USER’S GUIDE
4–50
Press the
Set
button to make the displayed selection effective, then
the display shows the font size setting menu.
✒ Note
When you have selected fixed-pitch fonts, you set the font size by the
character pitch (width). When you have selected proportional spacing
fonts, you set the font size in points (height). The display shows “PITCH”
or “POINT” accordingly. The following displays show “PITCH” to
simplify instructions.
Press the ▲ or ▼ button until the desired font size appears on the
display.
Press the
Set
button to make the displayed selection effective.
The blinking cursor then moves to the decimal part of the number.
Press the ▲ or ▼ button until the desired decimal number appears on
the display.
Press the
Set
button to make the displayed selection effective.
The display then shows the symbol set setting menu.
8. Press the
Set
button.
When you enter the symbol set setting mode, the display first shows
the current symbol set with an asterisk.
9. Press the ▲ or ▼ button until the desired symbol set appears on the
display.
See “List of Symbol/Character Sets”.
10. Press the
Set
button to make the displayed selection effective.
The display then shows the next menu.
11. Press the
Set
button to start printing the code table of the selected
font, or press the ▲ or ▼ button to skip this menu.
The display shows the exit menu.
12. Press the
Set
button to exit from the setting mode.
The printer returns to the off-line state.