Filter
Top Products
USER’S GUIDE
4–6
BUTTONS IN NORMAL MODE
You can control the basic printer operations and change various printer
settings in the NORMAL mode. Functions available in the NORMAL
mode are shown above the panel buttons.
Copy Pages Orientation Feeder
Emulation Mode K YMCToner
Ready
Alarm
Mode
Continue
Font
Set
On Line Data
Sel Form Feed
Fig. 4-3 Buttons in NORMAL Mode
✒ Note
The factory settings are printed in bold in this section.
SEL Button
Pressing the
Sel
button changes the state of the printer between on-line
and off-line. When the printer is on-line, the
On Line
LED lights and the
printer is ready to receive data from the computer. When the printer is
off-line, the
On Line
LED is off.
To receive data from the computer, set the printer on-line. To operate the
control panel buttons, set the printer off-line.
When you press the
Sel
button when the printer is the on-line state, it
turns off-line and the LCD displays the current emulation.
You can enter other emulations in the
AUTO
emulation mode by
pressing the ▲ (UP) or ▼ (DOWN) button.