Filter
Top Products
CHAPTER 5 MAINTENANCE
5-9
Fuser Cleaner
Fuser Cleaner Message
When the following message appears on the LCD panel, you need to
prepare a new Fuser Cleaner.
REPLACE FCR
Fuser Cleaner Change Message
When the following message appears on the LCD panel and the printer
stops printing, you need to replace the Fuser Cleaner.
24 CHANGE FCR
Replacing the Fuser Cleaner
Warning
The Fusing unit and the parts around it are HOT. Be sure to wait
about 30 minutes before you start replacing the Fuser Cleaner.
If you touch the HOT parts, you might get injured.
1. Press the
Power
button to turn the printer off and wait until it cools
down for approximately 30 minutes.
2. Open the Top cover.
3. Release the Oil Bottle Lock Levers on both sides as shown below.
Fig. 5-6 Release the Levers