Filter
Top Products
CHAPTER 4 CONTROL PANEL
4–23
✒ Note on “AUTO MASK”
When you use application software in non-HP modes, be sure to set
“AUTO MASK” to ON. When you use letter- or A4-size paper, the top
and bottom 2 lines are masked and they do not appear on the printout.
The auto modes are subject to the current emulation mode.
O
: The auto modes can be set.
X
: The auto modes cannot be changed and no setting appears.
—
: The auto modes are not available.
Printer Emulation (Factory settings in bold print)
AUTO Mode HP
PCL5C
EPSON
FX-850
IBM
Proprinter XL
AUTO LF
O
OFF
O
OFF
O
OFF
AUTO CR
O
OFF
X
ON
O
OFF (Note)
AUTO WRAP
O
OFF
X
ON
X
ON
AUTO SKIP
O
ON
——
AUTO MASK
—
O
OFF
O
OFF
✒ Note
In the IBM emulation mode, FF codes are always followed by a CR code.
PAGE FORMAT MODE
✒ Notes
The settings in this mode menu vary as follows:
All settings are effective in the HP PCL5C, EPSON FX-850, and IBM
Proprinter XL modes.
The X and Y (vertical and horizontal) offsets are effective in the BR-
Script 2 mode. Other settings are not effective and they do not appear
in this mode.
The paper size and the X and Y (vertical and horizontal) offsets are
effective in the HP-GL mode. Other settings are not effective and they
do not appear in this mode.