Filter
Top Products
CHAPTER 5 MAINTENANCE
5-9
Fuser Cleaner
Fuser Cleaner Message
When the following message appears on the LCD panel, you will need a
replacement Fuser Cleaner:
REPLACE FCR
Fuser Cleaner Change Message
When the following message appears on the LCD panel and the printer
stops printing, you must replace the Fuser Cleaner:
24 CHANGE FCR
Replacing the Fuser Cleaner
Warning
The Fusing unit and the parts around it are HOT! Be sure to wait
until the Fusing Unit has cooled sufficiently before replacing the
Fuser Cleaner.
If you touch the HOT parts, you might get injured.
1. Press the
Power
button to turn the printer off and wait until it has
cooled down sufficiently.
2. Open the Top Cover.
3. Release the Oil Bottle Lock Levers on both sides as shown below:
Fig. 5-8 Release the Levers