Filter
Top Products
USER’S GUIDE
4–34
DEVICE OPERATION
✒
Notes
• BE SURE TO TURN OFF THE PRINTER POWER BUTTON
BEFORE INSTALLING OR REMOVING A FLASH MEMORY
CARD OR HDD CARD, OR THE CARD WILL BE DAMAGED.
• Settings in this mode are effective only when you have installed a
flash memory card, HDD card or optional HDD and you have selected
PCL5C, HP-GL, or BR-Script 2. They will not appear if the printer
does not have a card installed or if it is in another emulation mode.
• If you turn the printer off or remove the flash memory card or HDD
card while data is being written onto or deleted from the card, all the
data on the card may be lost.
• If the write protect button of the flash memory card or HDD card is
on, this mode menu does not appear.
• An HDD card will only fit into slot 2.
Be sure to install a commercial flash memory card or HDD card in the
correct card slot of the printer.
When you are in this mode menu, you can save macros and fonts in the
installed flash memory card or the HDD card.
The sub-setting menus displayed in this mode will vary according to the
status of the installed card.
Display Message Card Operation
DEVICE 1
Select Card 1.
DEVICE 2
Select Card 2.
DEVICE 3 Select optional HDD.
When two cards are installed, you can select the card that you want to
operate.
When the installed card is not formatted:
When you enter this mode menu with a flash memory card, HDD card or
optional HDD installed but not formatted by this printer, you must first
format the device.