Filter
Top Products
CHAPTER 2 SETTING UP THE PRINTER
2–1
CHAPTER 2
SETTING UP THE PRINTER
This chapter can also be used as a quick setup guide, which provides information for
setting up the printer.
BEFORE USING THE PRINTER
Warning
This printer is heavy and weighs approximately 37kg (81.6 lbs).
When moving or lifting this printer, be sure to do so with at least 2
people to avoid injury.
Checking the Components
After unpacking the printer, check to see that you have all of the
following parts:
Fig. 2-1 Components in the Printer Carton
!
Caution
The Toner Cartridges, OPC Belt cartridge, Oil Bottle and Fuser Cleaner
are packed inside a separate carton as a starter kit. Do not open them now.
Only open them when you are ready to install them. The OPC Belt
Cartridge must not be exposed to light for any length of time or it will be
damaged.
OPC Belt Cartridge
(OP-1CL)
Fuser Cleaner
(FO-1CL)
Power Cord
Toner Cartridge
(Black (TN01BK), Cyan(TN01C),
Magenta (TN01M) ,Yellow (TN01Y))
Standard Media
Cassette
(pre-installed)
Printer
Oil Bottle
(FO-1CL)
Oil Syringe
User's Guide
CD-ROM