Filter
Top Products
Control Panel
75
3
Go 3
You can pause printing by pressing Go. Pressing Go again restarts the print job. During a pause, the printer
is offline.
Pressing Go allows you to choose the displayed option in the last menu level. After changing a setting, the
printer returns to the Ready state.
If Data remains in the printer memory, pressing Go will print that remaining data.
You can clear some error indications by pressing Go. Follow the control panel instructions or see
Troubleshooting on page 141 to clear all other errors.
You can switch to Reprint mode by pressing Go and holding it down for about 4 seconds. (For details, see
Reprinting documents on page 78.
Note
• The options you have chosen are shown with an asterisk at the end of the display. Since the asterisk
shows what you have chosen, you can easily see the current settings as you look through the LCD.
• If the printer is in Pause mode and you do not want to print the data left, press Cancel. Once the job has
been canceled, the printer will return to the Ready state.
Cancel 3
You can cancel the processing or printing of data by pressing Cancel. The LCD shows Cancel Printing.
until the job is canceled. To delete all jobs, press Cancel for about 4 seconds until the LCD shows
Cancel All Jobs and then release it.
After canceling the job, the printer returns to the Ready state.
Pressing Cancel will exit the control panel menu and return the printer to the Ready state.
Secure Print 3
If you want to print a secure data protected by a password, press Secure Print. For details, see Printing
Secure data on page 79
+ or - button 3
Moving through menus on the LCD 3
Pressing + or - when the printer is in the Ready state, takes it offline and the LCD will show the control panel
menu.
Press to scroll through the menus and options. Press the button until you see the setting you want.
Entering numbers 3
You can enter numbers in two ways. You can press + or - to move up or down one number at a time, or you
can hold down + or - to move faster. When you see the number you want, press OK.