Filter
Top Products
Control Panel
87
3
1
On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254.
[001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP address from the machine's control
panel.
Network for HL-3045CN users
Submenu Menu Selections Options Descriptions
TCP/IP Boot Method Auto*/Static/RARP/BOOTP
/DHCP
Choose the IP method that best suits
your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
Enter the Gateway address.
IP Boot Tries ##### (3*)
APIPA On*/Off Automatically allocates the IP
address from the link-local address
range.
1
IPv6 Off*/On
Ethernet Auto*/100B-FD/100B-HD/
10B-FD/10B-HD
Chooses Ethernet link mode.
Factory Reset Restores all network settings of the internal print server to the factory default.
The factory settings are shown in Bold with an asterisk.