Brother MFC-5890CN All in One Printer User Manual


 
Chapter 4
34
Changing the password 4
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Set Password.
Press OK.
e Enter the registered four-digit password.
Press OK.
f Enter a four-digit number for the new
password.
Press OK.
g When the LCD shows Verify:,
re-enter the new password.
Press OK.
h Press Stop/Exit.
Setting up and changing the
Public user 4
You can set up the Public user. Public users
do not need to enter a password. You can set
up one Public user.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Setup User.
Press OK.
e Enter the administrator password.
Press OK.
f Press a or b to choose Public.
Press OK.
g Do one of the following:
To set up the Public user, press
d
or
c
to choose
Enable
or
Disable
for
Fax Tx
. After you have set
Fax Tx
, press
a
or
b
to choose the
settings for
Fax Rx
,
Copy(Color)
,
Copy(B&W)
,
Scan
,
Print
and
PCC
by repeating this step.
Press OK.
To change the Public user settings,
press a or b to choose the setting
you want to change.
Press d or c to choose Enable or
Disable.
Repeat this step until you finish
changing settings.
Press OK.
Note
You can set PC Print and PhotoCapture
Print for only the Public user. If you disable
PC Print and PhotoCapture Print for the
Public user it will also disable PC Print and
PhotoCapture Print for all restricted users.
h Press Stop/Exit.