Brother MFC-5890CN All in One Printer User Manual


 
Chapter 4
36
Reset existing restricted users 4
You can reset restricted users one at a time.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Setup User.
Press OK.
e Enter the administrator password.
Press OK.
f Press a or b to choose the existing
restricted user you want to reset.
Press OK.
g Press a or b to choose Reset.
Press OK.
h Press 1 to choose Yes.
i Do one of the following:
Set new restricted user. (See Setting
up restricted users on page 35.)
If you do not want to set new
restricted user, go to step j.
j Repeat f to i if you want to reset more
users.
k Press Stop/Exit.
Turning Secure Function
Lock on/off 4
Note
If you enter the wrong password, the LCD
will show Wrong Password. Re-enter
the correct password.
Turning Secure Function Lock on 4
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Function Lock.
Press OK.
d Press a or b to choose Lock OffiOn.
Press OK.
e Enter your four-digit administrator
password.
Press OK.
Turning Secure Function Lock off 4
a Press Menu.
b Press a or b to choose Lock OniOff.
Press OK.
c Enter your four-digit administrator
password.
Press OK.