Filter
Top Products
23
3
3
Power Save mode 3
You can put the machine into Power Save
mode by pressing the Power Save key. You
can still receive telephone calls in Power
Save mode. For further information on
receiving faxes in the Power Save condition,
please see the table on page 24. The delayed
faxes that have been set up will be sent. You
can even retrieve faxes using Remote
Retrieval if you are away from your machine.
If you want to do other operations, you must
take the machine out of Power Save mode.
Note
If you have connected an external
telephone or TAD, it is always available.
Putting your machine in
Power Save mode 3
a Press the Power Save key. The LCD
will tell you that you cannot use the
phone once it is switched off.
Press Yes.
The LCD shows Shutting Down and
will stay on for a few seconds before
going off.
Bringing your machine out of
Power Save mode 3
a Press the Power Save key.
The LCD shows the date and time.
Note
• Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
• If you unplug the AC power cord, no
machine operations will be available.
• You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available. (See
Power Save setting on page 23.)
Power Save setting 3
You can customize the machine's
Power Save key. The factory setting is
Fax Receive:On. Your machine can
receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to Fax Receive:Off.
a Press MENU.
b Press a or b to display
General Setup.
c Press General Setup.
d Press a or b to display
P.Save Setting.
e Press P.Save Setting.
f Press Fax Receive:Off or
Fax Receive:On.
(MFC-790CW) Go to step h.
(MFC-990CW) If you choose
Fax Receive:On, go to step g.
If you choose Fax Receive:Off,
go to step h.
g Press Ring Tone:On.
Make sure you set the Ring Volume to
Low, Med or High. (See Ring Volume
on page 26.)
h Press Stop/Exit.
Note
If you choose Ring Tone:Off, the
machine will not ring when you receive a
call.
General setup 3